Monday , 25 September 2017
Home » Komunitas Bidang Ilmu » Teknik Struktur » Penelitian & Publikasi KBI Teknik Struktur

Penelitian & Publikasi KBI Teknik Struktur

Prof. Bambang Suryoatmono, Ph.D.

2013

  • Pranata, Y.A. dan Suryoatmono, B. 2012. ”Nonlinear Finite Element Modeling of Red Meranti Compression at an Angle to the Grain”. Journal of Engineering and Technological Studies, Vol. 45B, No.2.

2012

  • Suryoatmono, B. dan Pranata, Y.A. 2012. ”An Alternative of Hakinson’s Formula for Uniaxial Tension at an Angle to The Grain”. World Confrence of Timber Engeneering (WCTE). Auckland, New Zealand. 15-19 Juli 2012.
  • Suryoatmono, B. dan Sufnir, H. 2012. ”Curvature Factor of Curved Glulam Beam Made of Hardwoods”. The Fourth International Symposium of Indonesian Wood Research Society. November 2012.
  • Suryoatmono, B. dan Pranata, Y.A. 2012. ”Distortion Energy Criterion for Timber Uniaxial Compression Mechanical Properties”. Jurnal Dinamika Teknik Sipil, Vol. 12, No. 2. Mei 2012.
  • Pranata, Y.A., Suryoatmono, B., dan Tjondro, J.A. 2012. ”Rasio Modulus Penampang Elastik Balok Kayu Laminasi-Baut”. Jurnal Teknik Sipil, Vol. 19, No. 3. Desember 2012.

2011

  • Setiyarto, Y.D., Suryoatmono, B., dan Wijaya, P.K. 2011. ”Inovasi Peningkatan Kinerja Sambungan Baut pada Struktur Baja Ringan yang Menahan Momen Sebidang”. The 1st Structural Engineering and Material Symposium, Universitas Katolik Parahyangan. Bandung. 17-18 November 2011. ISBN 978-979-97606-5-4.
  • Supriatna, D. dan Suryoatmono, B. 2011. ”Analisis Keandalan Struktur Baja dengan Simulasi Monte Carlo”. The 1st Structural Engineering and Material Symposium, Universitas Katolik Parahyangan. Bandung. 17-18 November 2011. ISBN 978-979-97606-5-4.
  • Suryoatmono, B., Pratama, B., dan Aziz, M. 2011. ”Faktor Stabilitas Balok dan Kolom Kayu”. The 1st Structural Engineering and Material Symposium, Universitas Katolik Parahyangan. Bandung. 17-18 November 2011. ISBN 978-979-97606-5-4.
  • Pranata, Y.A., Suryoatmono, B., dan Tjondro, J.A. 2011. ”Kuat Lentur Balok Laminasi Baut”. The 1st Structural Engineering and Material Symposium, Universitas Katolik Parahyangan. Bandung. 17-18 November 2011. ISBN 978-979-97606-5-4.
  • Tjondro, J.A. dan Suryoatmono, B. 2011. ”Konsep Perencanaan Struktur pada Draft SNI Kayu 2012”. The 1st Structural Engineering and Material Symposium, Universitas Katolik Parahyangan. Bandung. 17-18 November 2011. ISBN 978-979-97606-5-4.
  • Suryoatmono, B. dan Erick. 2011. ”Inelastic Buckling of Cell Form Steel Column Using Nonlinear Time History Analysis”. The 6th International Symposium on Steel Structures. South Korea. 3-5 November 2011.
  • Pranata, Y.A., Suryoatmono, B., dan Tjondro, J.A. 2011. ”Perangkat Lunak untuk Analisis dan Desain Balok Laminasi”. Seminar MAPEKI XIV. Yogyakarta. 2 November 2011.
  • Pranata, Y.A., Suryoatmono, B., dan Tjondro, J.A. 2011. ”Penelitian Numerikal dan Eksperimental Kuat Lentur Kayu Indonesia”. Seminar Nasional-1 BMPTTSSI KoNTeKs5, Universitas Sumatera Utara. Medan. 14 Oktober 2011. ISBN 979-
  • Pranata, Y.A., Suryoatmono, B., dan Tjondro, J.A. 2011. ”The Flexural Rigidity Ratio of Indonesian Timber Bolt-Laminated Beam”. The 3rd International Conference of European-Asian Civil Engineering Forum. Yogyakarta. 20-22 September 2011. ISBN No. 978-602-8817-30-1.
  • Suryoatmono, B. dan Putra, R. 2011. ”Tensile Behaviour of Some Indonesian Species Wood Butt Joint Using Claw Nail Plate”. Society of Wood Science and Technology 2011 International Annual Convention Portland”. Juni 2011. Oregon, USA.
  • Suryoatmono, B. dan Pranata, Y.A. 2011. “Distortion Energy Criterion for Uniaxial Tension at an Angle to The Grain”. Society of Wood Science and Technology 2011 International Annual Convention Portland”. Juni 2011. Oregon, USA.
  • Supriatna, D. dan Suryoatmono, B. 2011. ”Studi Mengenai Metode Superposisi Ragam Efektif untuk Struktur dengan Redaman Non Klasik”. Jurnal Teknik Sipil Fakultas Teknik Universitas Bandar Lampung, Volume 2 Nomor 2, Oktober 2011. pp. 193-203. ISSN 2087-2860.

2010

  • Suryoatmono, B. and Bukhari, A. 2010. Study on Load Carrying Capacity and Stiffness of Curved Glulam Beam”. The Second International Symposium of Indonesian Wood Society, November 2010.
  • Suryoatmono, B. and Peterson, R. 2010. The Effect of Lamina Configurations of Glue Laminated Timber on the Modulus of Elasticity and the Modulus of Rupture”. The Second International Symposium of Indonesian Wood Society. November 2010.
  • Pranata, Y.A., Suryoatmono, B., and Tjondro, J.A. 2010. “Experimental Tests and Finite Element Analysis of Flexural Behavior of Bolt-laminated Timber Beams”. The Second International Symposium of Indonesian Wood Society. November 2010.

2009

  • Tjondro, J.A., Suryoatmono, B. and Imran, I. 2009. A Non-linier Compression Stress-strain Curve Model for Hardwood”. The First International Symposium of Indonesian Wood Research Society. Bogor. 2-3 November 2009.
  • Tjondro, J.A., Suryoatmono B. Sifat Mekanis Linear dan Non Linear Kayu Indonesia”. DP2M – Dikti.
  • Tjondro, J.A., Suryoatmono B., Dhanar. 2009. Kuat Geser Sejajar Serat Kayu Indonesia. Seminar Nasional Masyarakat Peneliti Kayu Indonesia”. MAPEKI XII. Bandung. 23-25 Juli 2009.
  • Tjondro, J.A., Suryoatmono, B., Fridayani, K.A., Sudirman, V. 2009. ”Kuat Tarik Sejajar dan Tegak-lurus Serat Kayu Indonesia”. Seminar Nasional Masyarakat Peneliti Kayu Indonesia. MAPEKI XII. Bandung. 23-25 Juli 2009.
  • Madutujuh, N. and Suryoatmono, B. 2009 “Analisis Non Linear untuk Struktur Baja”. Seminar Nasional Teknik Struktur Perkembangan Mutakhir Pemanfaatan Material Baja dalam Industri Konstruksi. Bandung. 17-18 Juli 2009.
  • Suryoatmono, B. and Ariahadie, A. 2009 “Tinjauan Tekuk Inelastis pada Struktur Baja”. Seminar Nasional Teknik Struktur Perkembangan Mutakhir Pemanfaatan Material Baja dalam Industri Konstruksi. Bandung. 17-18 Juli 2009.

2008

  • Madutujuh, N., Suryoatmono, B., and Imran, I. 2008. “Pengaruh Pengaku Tengah dalam Meningkatkan Kuat Tekan Penampang Baja Ringan: Studi Analisis dan Eksperimental”. Seminar HAKI 2008 Pengaruh Gempa dan Angin terhadap Struktur, 19-20 Agustus 2008.
  • Suryoatmono, B. and Tjondro, J.A. 2008. “Lateral Torsional Buckling of Orthotropic Rectangular Beams”. World Conference on Timber Engineering. 2-5 Juni 2008. Miyazaki. Japan.

2007

  • Susilorini, MIR. and Suryoatmono, B. 2007. “Trass, masa depan bagi Pozzolan Alam sebagai Agregat Alternatif untuk Campuran Beton”. Sustainability dalam bidang Material, Rekayasa, dan Konstruksi Beton. Bandung. 4 Desember 2007.
  • Suryoatmono, B. 2007. “Penggunaan Kayu Struktural di Indonesia”. Seminar Setengah Hari Pemanfaatan Kayu sebagai elemen pendukung arsitektur tropis. Bandung. 28 September 2007.
  • Karlinasari, L., Surjokusumo, S., Nugroho, N., Hadi, Y.S., and Suryoatmono, B. 2007. “Bending Strength Prediction of Wood Beam Constructed from Small Specimens”. 15th International Symposium on Nondestructive Testing of Wood – Duluth. Minnesota. USA.
  • Suryoatmono, B. and Tjondro, J.A. 2007. “Evaluation of Moduli of Elasticty and Damping Ratios of Some Indonesian Wood Species using Free Vibration Method”. 15th International Symposium of Nondestructive Testing of Wood. Duluth. Minnesota. USA.
  • Tjondro, J.A. and Suryoatmono, B. 2007. “The Effects of Specimen Dimensions on the Accuracy of the Determination of Moduli of Elasticity using Ultrasonic Longitudinal Wave Propagation Method”. 15th International Symposium on Nondestructive Testing of Wood. Duluth. Minnesota. USA.

2006

  • Dewobroto, W., Besari, S., and Suryoatmono, B. 2006 “Perlunya Pembelajaran Baja Cold-Formed dalam Kurikulum Konstruksi Baja di Indonesia”. Workshop in Teaching Structural Mechanics, Concrete Structures, and Steel Structures. Bali. 26-27 July. 2006.
  • Suryoatmono, B. and Winata 2006. Finite Element Analysis for Predicting Lateral Torsional Buckling Modification Factor. ACMSM 19 International Conference – New Zealand.
  • Suryoatmono, B. and Hendra, A. 2006. A Nonlinear Finite Element Approach for Computing Net Area of Tensile Steel Plates with Staggered Holes. The Tenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-10). Bangkok. Thailand.
  • Tjondro, J.A., Suryoatmono, B. and Imran, I. 2006. “Dowel-Bearing Strength of Indonesian-wood Species”. The Tenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-10). Bangkok. Thailand.